Mechanical, physical and environmental performance of sustainable concrete containing marble wastes

Journals

Title：
Mechanical, physical and environmental performance of sustainable concrete containing marble wastes
Author：
Mohammed Khattab^{1, *}, Oday Jaradat¹, Samya Hachemi¹, Hisham Suleiman², Hicham Benzetta³
Author Affiliation：
1.University Mohamed Khider, Biskra, Algeria
2.University 20 août 1955, Skikda, Algeria
3.UniversitéZiane Achour, Djelfa, Algeria
Received：May.25, 2023
Accepted：Jun.25, 2023
Published：Jul.13, 2023

Abstract

Background: Today, Construction and Demolition Wastes (CDW) are undoubtedly the most studied materials in sustainable construction. Objective: This paper examines the effect of Recycled Marble Aggregates (RMA)

on the mechanical, physical and environmental performance of concrete. In this context, natural aggregates (fine, coarse or both) were totally replaced (100%) with RMA. Method: The paper discussed some mechanical and physical parameters of the hardened concrete, such as Ultrasonic Pulse Velocity (UPV), Dynamic Elastic Modulus (Edy), Density (D) and Compressive Strength (

Keywords

Recycled marble, Aggregates, wastes, sustainable construction, environmental impacts.

Doi

https://doi.org/10.58396/smmce020202

References

[1] Alshboul, O., Shehadeh, A., Almasabha, G., Almuflih, A. S. (2022). Extreme gradient boosting-based machine learning approach for green building cost prediction. Sustainability, 14(11), 6651.

[2] Hachemi, S., Ounis, A. (2015). Performance of concrete containing crushed brick aggregate exposed to different fire temperatures. European Journal of Environmental and Civil Engineering, 19(7), 805-824. DOI: 10.1080/19648189.2014.973535.

[3] Bui, N. K., Satomi, T., Takahashi, H. (2018). Effect of mineral admixtures on properties of recycled aggregate concrete at high temperature. Construction and Building Materials, 184, 361-373.

[4] Mohammed, KHATTAB (2022). Contribution of refractory brick aggregates to improving the behavior of concrete subjected to high temperature (Doctoral dissertation, Faculté des Sciences et de la technologie).

[5] Debieb, F., Kenai, S. (2008). The use of coarse and fine crushed bricks as aggregate in concrete. Construction and building materials, 22(5), 886-893. https://doi.org/10.1016/j.conbuildmat.2006.12.013

[6] Dimitriou, G., Savva, P., Petrou, M. F. (2018). Enhancing mechanical and durability properties of recycled aggregate concrete. Construction and Building Materials, 158, 228-235. https://doi.org/10.1016/j.conbuildmat.2017.09.137.

[7] Duarte, G., Bravo, M., de Brito, J., Nobre, J. (2019). Mechanical performance of shotcrete produced with recycled coarse aggregates from concrete. Construction and Building Materials, 210, 696-708. https://doi.org/10.1016/j.conbuildmat.2019.03.156.

[8] Khattab, M., Hachemi, S., Benzetta, H. (2021). Assessment of quality of recycled brick concrete using Ultrasonic pulse velocity. In ASPS Conference Proceedings, First International Conference on Energy, Thermofluids and Materials Engineering, ICETME 2021.

[9] Khattab, M., Hachemi, S., Al Ajlouni, M. F. (2021, June). The Use of Recycled Aggregate from Waste Refractory Brick for The Future of Sustainable Concrete. In International Congress on Phenomenological Aspects of Civil Engineering (PACE-2021) (pp. 20-23).

[10] Alshboul, O., Almasabha, G., Shehadeh, A., Al Hattamleh, O., Almuflih, A. S. (2022). Optimization of the Structural Performance of Buried Reinforced Concrete Pipelines in Cohesionless Soils. Materials, 15(12), 4051.

[11] Shehadeh, A., Alshboul, O., Tatari, O., Alzubaidi, M. A., Salama, A. H. E. S. (2022). Selection of heavy machinery for earthwork activities: A multi-objective optimization approach using a genetic algorithm. Alexandria Engineering Journal, 61(10), 7555-7569.

[12] Almasabha, G., Alshboul, O., Shehadeh, A., Almuflih, A. S. (2022). Machine learning algorithm for shear strength prediction of short links for steel buildings. Buildings, 12(6), 775.

[13] Alshboul, O., Alzubaidi, M. A., Mamlook, R. E. A., Almasabha, G., Almuflih, A. S., Shehadeh, A. (2022). Forecasting liquidated damages via machine learning-based modified regression models for highway construction projects. Sustainability, 14(10), 5835.

[14] KHATTAB, M., HACHEMI, S., al Ajlouni, M. F. (2021). Recycled Refractory Brick as Aggregate for Eco-friendly Concrete Production. Journal of Advanced Sciences and Engineering Technologies, 4(1), 32-49.

[15] Khattab, M., Hachemi, S. (2021). Performance of recycled aggregate concrete made with waste refractory brick.

In International Journal of Engineering Research in Africa (Vol. 57, pp. 99-113). Trans Tech Publications Ltd. Doi.10.4028/www.scientific.net/JERA.57.99.

[16] Verian, K. P., Ashraf, W., & Cao, Y. (2018). Properties of recycled concrete aggregate and their influence in new concrete production. Resources, Conservation and Recycling, 133, 30-49.

[17] Sasanipour, H., Aslani, F. (2020). Durability properties evaluation of self-compacting concrete prepared with waste fine and coarse recycled concrete aggregates. Construction and Building Materials, 236, 117540. DOI: 10.1016/j.conbuildmat.2019.117540.

[18] Hachemi, S., Khattab, M. & Benzetta, H. The effects of recycled brick and water/cement ratios on the physical and mechanical performance of recycled aggregates concrete. Innov. Infrastruct. Solut. 7, 270 (2022). https://doi.org/10.1007/s41062-022-00868-y

[19] Khattab, M., & Hachemi, S. (2020). Performance of concrete made with recycled coarse aggregate from waste refractory brick. Algerian journal of engineering architecture and urbanism, 4, 79-94.

[20] Ural, N., Yakşe, G. (2020). Utilization of marble piece wastes as base materials. Open Geosciences, 12(1), 1247-1262. https://doi.org/10.1515/geo-2020-0197.

[21] Kırgız, M. S. (2016). Fresh and hardened properties of green binder concrete containing marble powder and brick powder. European Journal of Environmental and Civil Engineering, 20(sup1), s64-s101. Doi:10.1080/19648189.2016.1246692.

[22] Hebhoub, H., Aoun, H., Belachia, M., Houari, H., Ghorbel, E. (2011). Use of waste marble aggregates in concrete. Construction and Building Materials, 25(3), 1167-1171. https://doi.org/10.1016/j.conbuildmat.2010.09.037

[23] Buyuksagis, I. S., Uygunoglu, T., Tatar, E. (2017). Investigation on the usage of waste marble powder in cement-based adhesive mortar. Construction and Building Materials, 154, 734-742. Doi:10.1016/j. conbuildmat.2017.08.014.

[24] Keleştemur, O., Yildiz, S., Gökçer, B., Arici, E. (2014). Statistical analysis for freeze–thaw resistance of cement mortars containing marble dust and glass fiber. Materials & Design, 60, 548-555. Doi: 10.1016/j.matdes.2014.04.013.

[25] Vardhan, K., Siddique, R., Goyal, S. (2019). Influence of marble waste as partial replacement of fine aggregates on strength and drying shrinkage of concrete. Construction and Building Materials, 228, 116730. Doi: 10.1016/j.conbuildmat.2019.116730.

[26] Gameiro, F., De Brito, J., da Silva, D. C. (2014). Durability performance of structural concrete containing fine aggregates from waste generated by marble quarrying industry. Engineering Structures, 59, 654-662. Doi: 10.1016/ j. engstruct.2013.11.026.

[27] Kore, S. D., Vyas, A. K. (2016). Impact of marble waste as coarse aggregate on properties of lean cement concrete. Case studies in construction materials, 4, 85-92. https://doi.org/10.1016/j.cscm.2016.01.002.

[28] Binici, H., Shah, T., Aksogan, O., Kaplan, H. (2008). Durability of concrete made with granite and marble as recycle aggregates. Journal of materials processing technology, 208(1-3), 299-308. Doi: 10.1016/ j. jmatprotec.2007.12.120.

[29] Andre, A., de Brito, J., Rosa, A., Pedro, D. (2014). Durability performance of concrete incorporating coarse aggregates from marble industry waste. Journal of Cleaner Production, 65, 389-396. Doi: 10.1016/j.jclepro.2013.09.037.

[30] French standardization P 18-554. (1990). Aggregates – Measurement of densities, porosity, absorption coefficient and water content of fine gravel and pebbles. French Association for Standardization (AFNOR). Tour Europe cedex 7 92049. Paris.

[31] French standardization P 18-573. (1990). Aggregates – Los Angeles test. French Association for Standardization (AFNOR). Tour Europe cedex 7 92049. Paris.

[32] French standardization P 18-555. (1990). Aggregates – Measurement of densities, absorption coefficient and water content of sands. French Association for Standardization (AFNOR). Tour Europe cedex 7 92049. Paris.

[33] French standardization P 18-598. (1991). Aggregates – Sand equivalent. French Association for Standardization (AFNOR). Tour Europe cedex 7 92049. Paris

[34] French standardization P 18-560 (1990) Aggregates—Particle size distribution by sieving. French Association for Standardization (AFNOR), Tour Europe cedex 7 92049, Paris

[35] Dreux G, Festa J. New guide to concrete and its constituents. Edition Eyrolles, Paris; 1998: Vol. 8, pp. 205–284.

[36] European Standard NF EN 12390-7. (2001). Test for hardened concrete Part 7: Density of concrete. ISSN 0335-3931. The French Association of Standardization (AFNOR), 11 avenue Francis de Pressens´e 93571 Saint-Denis La Plaine Cedex.

[37] French standardization P 18-418. (1989). Concrete – Sonic auscultation, measurement of the sonic wave transmission time in concrete. French Association for Standardization (AFNOR). Tour Europe cedex 7 92080. Pari.

[38] ASTM C 597-16. 2016. Standard Test Method for Pulse Velocity through Concrete. Book of Standards Volume: 04.02.

[39] Hachemi, S., Khattab, M., & Benzetta, H. (2023). Enhancing the performance of concrete after exposure to high temperature by coarse and fine waste fire brick: An experimental study. Construction and Building Materials, 368, 130356.

[40] Khattab, M., Hachemi, S., Al Ajlouni, M. F. (2021). Evaluating the physical and mechanical properties of concrete prepared with recycled refractory brick aggregates after elevated temperatures’ exposure. Construction and Building Materials, 311, 125351. DOI: 10.1016/j.conbuildmat.2021.12535.

[41] European Standard NF EN 12390-3. (2003). Test for hardened concrete Part 3: Compressive strength of test specimens. ISSN 0335-3931. The French Association of Standardization (AFNOR). 11 avenue Francis de Pressens´e France 93571 SaintDenis La Plaine Cedex.

[42] Devi, K., Saini, B., Aggarwal, P. (2021). Economic and Ecological Feasibility of Marble Powder in Cement Mortar. In: Kalamdhad, A.S. (eds) Integrated Approaches Towards Solid Waste Management . Springer, Cham. https://doi.org/10.1007/978-3-030-70463-6_7.

[43] Kim, T. H., Tae, S. H. (2016). Proposal of environmental impact assessment method for concrete in South Korea: An application in LCA (life cycle assessment). International journal of environmental research and public health, 13(11), 1074.

[44] Alves AV, Vieira TF, De Brito J, Correi JR: Mechanical properties of structural concrete with fine recycled ceramic aggregates. Construction and Building Materials.2014;64:103-113. DOI: 10.1016/j.conbuildmat.2014.04.037.

[45] Uygunoğlu, T., Topçu, İ. B., Çelik, A. G. (2014). Use of waste marble and recycled aggregates in self-compacting concrete for environmental sustainability. Journal of cleaner production, 84, 691-700. Doi.org/10.1016/j.jclepro.2014.06.019.

[46] Alzard, M. H., El-Hassan, H., El-Maaddawy, T. (2021). Environmental and economic life cycle assessment of recycled aggregates concrete in the United Arab Emirates. Sustainability, 13(18), 10348.